ORUST NECK SYSTEM LATEX SEAL

sitech orust neck system latex seal: ORUST Neck System is the third generation of Neck System. An even softer and more flexible Modular Quick Change Solution for the neck! The design provides superb comfort and can be mounted in a great range of garments. The Neck Ring and the Lock Ring is made in a softer material and clips are added to keep the neck seal in place. Tool is no longer needed for installation of the neck seal; the seal and Lock Ring can easily be mounted into the PU-Ring by hand.

3L STEEL SINGLE 232 B

The range of steel cylinders offered by BtS Europa AG is produced by Eurocylinders System AG (ECS). ECS is one of the biggest and most efficient manufacturers of high pressure steel cylinders in Europe with an annual output of more than 500,000 cylinders. ECS manufactures on two production lines at their plant in Apolda, Germany. Cylinders are forged from 34CrMo4 steel.

3 L STEEL OXYGEN CYLINDER W/ VALVE

3 litre Steel Oxygen Cylinder: WP 232 Bar, M25 x 2, c/w Oxygen Sticker. Oxygen Clean Rebreather Cylinder Valve: DIN 5/8" BSP outlet, green hand wheel and green bump cap, M25 x 2 ISO

ORUST NECK SYSTEM SILICONE SEAL

sitech orust neck system silicone seal: ORUST Neck System is the third generation of Neck System. An even softer and more flexible Modular Quick Change Solution for the neck! The design provides superb comfort and can be mounted in a great range of garments. The Neck Ring and the Lock Ring is made in a softer material and clips are added to keep the neck seal in place. Tool is no longer needed for installation of the neck seal; the seal and Lock Ring can easily be mounted into the PU-Ring by hand.

3 L STEEL DILUENT CYLINDER W/ VALVE

3 litre Steel Cylinder: WP 232 Bar, M25 x 2, c/w Diluent Sticker. Rebreather Diluent Cylinder Valve: DIN 5/8" BSP outlet, black hand wheel and black bump cap, M25 x 2 ISO

BASIC COMPLETE HARNESS + KNIVE

Complete set contains of: PA harness with grommet, pocket with knife, crotch strap with 1 integrated D-ring and belt stopper, 1x stainless-steel D-ring, 3x stainless-steel D-ring bend, 6x stainless-steel stoppers, stainless-steel buckle, 5 narrow and 1 wide bungees

BIG POCKET FOR SUIT

A pocket suitable for sticking on a diving suit, velcro closure. Made for carrying a spare mask, reel, buoy or a snack. Dimensions 29x19x6 cm. Material:cordure 1100, neoprene, velcro

SITECH BALANCED PEE VALVE

Use a Pee Valve and extend your bottom time. No use having loads of breathing gas when nature prevents you from concentrating. Long working hours and deco times are no longer a problem. Relieve yourself in a donned drysuit!

2 L STEEL OXYGEN CYLINDER W/ VALVE

2 litre Steel Oxygen Cylinder: WP 232 Bar, M25 x 2, c/w Oxygen Sticker. Rebreather Oxygen Cylinder Valve: oxygen clean, DIN 5/8" BSP outlet, green hand wheel and green bump cap

COMPLETE ADJUSTABLE HARNESS + KNIFE

Complete set contains of: PA harness with grommet with integrated: 2x adjustable stainless-steel buckles, 2x stainless-steel D-ring bend and 2x stainless-steel stoppers, 4 narrow and 1 wide bungees

copy of COMPLETE ADJUSTABLE HARNESS + KNIFE

Complete set contains of: PA harness with grommet with integrated: 2x adjustable stainless-steel buckles, 2x stainless-steel D-ring bend and 2x stainless-steel stoppers, 4 narrow and 1 wide bungees

2 L STEEL OXYGEN CYLINDER W/ M26 VALVE

2 litre Steel Oxygen Cylinder: WP 232 Bar, M25 x 2, c/w Oxygen Sticker. M26 Rebreather Oxygen Cylinder Valve (2008 on Euro Spec): oxygen clean, M26 outlet, green hand wheel and green bump cap

2 L STEEL DILUENT CYLINDER W/ VALVE

2 litre Steel Diluent Cylinder: WP 232 Bar, M25 x 2, c/w multilingual "Compressed Gas / Breathing Air" cylinder sticker. Rebreather Diluent Cylinder Valve: DIN 5/8" BSP outlet, black hand wheel and black bump cap

BASIC HARNESS

The WTX and WTX-D Series is a selection of harnesses, buoyancy cells and accessories which offer unparalleled versatility due to the modular nature of the whole system. Each component can be configured into a highly technical rig for those trained to push the limits, or scaled down to make a travel friendly set up suitable for any diver

1.5 L ALUMINIUM CYLINDER W/1 EXIT VALVE 232 B

The range of aluminium cylinders offered by BtS Europa AG is produced by Luxfer Gas Cylinders either at their UK or US production plants. Luxfer Gas Cylinders is the world’s largest manufacturer of high pressure aluminium cylinders.

BASIC DIR HARNESS

This basic harness uses 25 feet of 2 inch nylon webbing material, 3 stainless steel D-rings with weight stops are included. Two at chest level and one on the waist. Easily repositioned for optimal configuration with an OMS Stainless Steel buckle. A 2 inch sewn crotch strap with a 2 inch Scooter “D” ring is also included. This harness is available to be installed on a diver’s backplate or on the OMS Aluminum or Stainless Steel backplates. Divers that prefer the simplest, most utilitarian harness generally choose this configuration. Available as a Kit or installed on OMS Backplates

1.5 L ALUMINIUM ARGON CYLINDER

1.5 litre Aluminium Cylinder complete with DIN/A-clamp Convertible X-Flow Valve. 28.5cm long x 11cm diam. Working Pressure 200 bar. Black hand-wheel

ELITE 2 HARNESS

Tech/Rec is at its best with the Elite 2 Harness. The Elite 2 Harness System offers you all the features of a technical harness with the added comfort that recreational divers look for.

1.0 L ALUMINIUM ARGON CYLINDER

1.0 litre Aluminium Cylinder complete with DIN/A-clamp Convertible X-Flow Valve. 23cm long x 10cm diam. Working Pressure 200 bar. Black hand-wheel

SOLO HARNESS

Designed to meet all the needs of demanding technical divers, the Solo Harness System is clean, simple, and foolproof!

1.5 L ALUMINIUM ARGON CYLINDER W/M25 VALVE

The range of aluminium cylinders offered by BtS Europa AG is produced by Luxfer Gas Cylinders either at their UK or US production plants. Luxfer Gas Cylinders is the world’s largest manufacturer of high pressure aluminium cylinders.

BLACK WEIGHT POCKET 2.3 KG UNIT

High resistance cordura weight pocket for harness, with capacity for 2.3 kg ballast pads approximately. Fast closing and release clip in plastic on the outside and flap with Velcro. Ideal to place on harness webbing, tank webbing and even on belts. Stainless steel eyelet at the bottom for water drainage and rear strap to adjust to bottle buckle or harness. Sold by the unit.

0,8 L ALUMINIUM ARGON CYLINDER W/ M25 VALVE

The range of aluminium cylinders offered by BtS Europa AG is produced by Luxfer Gas Cylinders either at their UK or US production plants. Luxfer Gas Cylinders is the world’s largest manufacturer of high pressure aluminium cylinders.